Earlier we have shown you how to install Windows 7 using bootable USB/flash/pen drive and also how to create only a bootable USB. As many users are asking. Dec 14, 2004 With the cost of solid state disks like Compact Flash and USB. Boot Windows XP Off a Compact Flash. And doing a fresh install of Windows and. Question is: Is there a way to install WinXP to a Compact Flash card and make a computer use it as primary bootdisc? Card reader is available in. Download the latest drivers for your Compact Flash to keep your Computer up-to-date.
As far as I know, Windows 7 does not natively support installing on a CF drive because it could be removable storage. A Compact flash drive has advantages and disadvantages. For example, it might increase battery life, and offers a much faster access time. However, it has much less read and write throughputs as compared to a traditional 5200 RPM or 7200 RPM HDD. If you want to increase your PC's performance, I would recommend investing in an SSD. Common links: Solid State Drives: FAQ: Choosing the right SSD: Cheers!
For this to work, there will have to be enough room on your CF card for your install of XP plus an install of your favorite distro of Linux. Wabco Pc Diagnostics more. With this in mind, I would recommend no less than a 4GB card. Speed is also an issue, as read and write speeds are slower than on a conventional hard drive and slower read times can lead to longer startup times. Buy the best that you can afford, as a 4GB card can be had for $10 off of ebay. Write cycles is another consideration, since all normal CF media has a limited number of write cycles. If the write cycle problem is a deal breaker, a microdrive is another good option. It has the small form factor of a CF flash drive but without the read/write limitations.
The microdrive is limited to 8GB in size, but work well when coupled with a standard CF card. Note that some embedded microdrives will internally be wired as master and will not work at all in the slave position on a dual CF adapter. This will keep you from using two microdrives on the same IDE connector. This will require either an internal CD-ROM drive or an external USB CD-ROM drive connected, and the BIOS set to boot from the CD drive before the hard drive. With your CF adapter properly installed in your computer, install only the card that you want to use as the boot drive and verify that the computer recognizes it as master. Put the Linux live CD in and let the computer boot up. Go to a terminal and run the command, 'sudo gparted' (without the quotations).
Select the disk that represents your CF drive and right click the partition on it, and click delete. This should leave you with the whole drive as unpartitioned space. Balderdash Game Sheets. Right click the unpartitioned space and click New Partition. Select the maximum available space and set the format to FAT32. Click apply and once it completes, exit gparted. Shut down the live session. Put the Windows CD in the drive, and let the computer boot into the setup.
Go ahead and partition the whole disk as your windows partition, and format it to the file system of your choice (I prefer FAT32). Let the installation continue as normal until it reboots. At this point, swap to a Linux live CD (I used Ubuntu 8.04) and let it boot to its startup menu.
Choose install, and let it boot into its setup. Go through its installation steps until it asks for what drive to put it on. Choose to resize the drive and give the Ubuntu installation about 2.5GB of the available space.
Finish the installation as normal and reboot. Swap back to the Windows CD, and let the GRUB menu pop up. Choose the Windows XP option and hit enter. The Settlers 4 Gold Edition. This should start up the second half of the installation. Let this finish as normal and you have a working install of Windows Why this works (or at least my educated guess) - The code that checks if windows is being run from a removable device is in the windows bootloader (ntldr).
When Linux is installed, it installs its bootloader (GRUB) to the master boot record. Since the Linux bootloader detects other installations on the computer, it will give you the option of starting XP. When it starts XP, it doesnt run the Windows bootloader code and runs its own code instead.