EX90: Make Console Cable using CA42 USB Data Cable TelePresence. OEM Cable Drivers. If you're using the CA-42 OEM cable, the drivers can be downloaded from here.
Introduction This document will provide instruction of how to create an EX90 console cable using a Nokia CA42 USB Data Cable and console into a unit. Core Issue There may be situations where consoling into an EX90 can solve an issue that is not related to hardware. A console cable for the EX90 is not provided by default or readily available for purchase, but, one can be assembled relatively easy.
Steve Jobs Biography Pdf In Gujarati Yahoo. This document describes how to create a Cisco TelePresence EX90 console cable with a Nokia CA-42 USB data cable. There might be situations where consoling into an. Download the latest Windows drivers for Nokia CA-42 USB Driver. Drivers Update tool checks your computer for old drivers and update it. Get latest Nokia CA-42 USB.
Resolution Gather the Necessary Tools and Equipment The following tools will be necessary to create the EX90 console cable: • Nokia CA-42 USB Data Cable or compatible cable. If you're not using the OEM cable, ensure it contains the PL2303 chip. This example will be using the compatible found. • RJ45 Crimp Tool • RJ45 End Optional Tools • Soldering Iron • Solder • Wire Strippers Verify the Cable Pin-outs Before creating the cable, locate the TX, RX and GRD. Pin-out for the Nokia OEM cable: Pin-out for the compatible cable used in this example: Pin-out for the compatible cable used in this example: Note: All compatible cables may not have the same color wires. If you're not sure of the pin-outs of the cable you're using, cut off the connector end of the cable leaving a couple inches connected to it. Use a multimeter to locate the TX, RX and GND.
Prep the Cable Strip the sheathing off the TX, RX and GND. It's a good idea to solder the ends of the wires to make them easier to work with. Create the Cable Crimp the RJ-45 on the end of the USB side of the cable.
Download Vista Lakes Elementary School In Orlando Fl on this page. Ensure the TX, RX and GND are in the correct positions before crimping. Connecting to an EX90 Load the correct cable drivers • OEM Cable Drivers. Binary Search Tree Program In Ds.
If you're using the CA-42 OEM cable, the drivers can be downloaded from. Use guest/guest for the username/password.
Click the link for PL2303 USB to Serial Drivers. • For Windows, locate the file PL2303_Prolific_DriverInstaller_v1.7.0.zip. The file contains all of the windows drivers. • For Mac, locate the appropriate driver based on your OS level • Compatible Cable Drivers. • For Windows, the Serial PS2303 driver from can be used. • For Mac: • OSX 10.5 and earlier • OSX 10.6 • OSX 10.7 Connecting to the EX90 Console Locate The EX90 Console Port The EX90 console port is an 8P8C (RJ45) connection and is located on the bottom left corner of the unit. Connect to the Console Port Plug the 8P8C (RJ45) end into the console port.
You'll have to lean the unit forward to plug the cable in. It might be a little awkward to do alone. If someone else is available, ask for their assistance. As a last resort, lay the unit down. Ensure you have something soft (like a towel) to lay the unit on.